Tungsten Carbide Hardfaced Wood chipper wear parts

Tungsten Carbide Hardfaced Wood chipper wear parts

Wood chipper has become increasingly popular in the last few decades. That is because of the high demands of the wood material in most of the industries. Today, wood chips are widely used as fuel for boilers replacing fossil fuel. They are also widely in woodwork for making various wood items as well as packaging. Therefore, start a wood grinding or chipping plant is a profitable venture. However, the quality of wood chipper wear parts good for you to get the most out of the machine.

Among the critical wear parts are wood chipper blades. These the wear parts that chip wood into required chips. Depending on the nature of the wood that you are dealing with, you need to have the best quality. Tungsten carbide hardfacing is one of the best techniques that you can use to improve the quality of the wood chipper wear parts. Here are some of the key advantages of hardfacing chipper blades and other cutting parts with tungsten carbide:

Increased cutting performance

The cutting performance of wood chipper blades is one of the key features that operators should look out for. It is one of the features that determine the speed of chipping and the quantity. The sharper the teeth, the higher the cutting performance. That is why tungsten carbide hardfacing is one of the best technique for the chipper blades. Tungsten carbide does not wear down easily. Therefore, the blade tips will not become dull or blunt quickly hence you can enjoy the high cutting performance for long.

High profitability

At the end of the, it is more about the money that you make as the plant owner. Therefore, profitability is key. If you are chipping wood on a commercial basis, then with tungsten hard faced wood chipper wear parts, your revenue will improve significantly. The reason for this is because sharp blades will increase the overall productivity of the wood chipper. You will also enjoy high productivity for long as the carbide coating does not wear down that easily.

Improved Efficiency

We know that the efficiency of the machine starts from the wear parts. That is the same case with the wood chipper. Make sure that you have maintained the cutter tools in their best condition and you will never have a problem with poor efficiency. The best way to achieve that is by keeping the wood chipper wear parts, especially the blades or knives sharp. Tungsten carbide hardfacing is the best way to keep your wood chipper blades sharp for the longest for improved efficiency.