Tips For Keeping Your Hydraulic Punch Press In Perfect Condition

To keep your hydraulic punch press in perfect condition, you need to take into consideration the issue of maintenance. You cannot have the machine operating in the best condition or as if it is new for a long time without maintaining it.

However, the biggest challenge comes from doing the actual maintenance. Most people tend to think that oiling the machine is all they need to do. But there is more that’s needed from these machines’ maintenance. Here are tips you can use to keep your hydraulic punch press in perfect condition:

Proper Use As Recommended

The use of the hydraulic punch press is the first step towards proper maintenance. There are many ways that you can tell how the machine should be used. One of them is reading and understanding the application specification details provided by the manufacturer. If you have not bought the machine, make sure that you have gotten the right one for the job. Don’t misuse.

Changing Hydraulic Oil

The other way you can keep your hydraulic punch press in perfect condition for a long is by changing the oil. Make sure that you are checking the condition of the hydraulic oil if you have used it for an extended period. Check for air or water in the oil and change in color, as these are the signs of ineffective hydraulic oil.

Lubrication

Keep the machine lubricated all the time. The hydraulic punch press usually has so many moving parts. If they are not lubricated, they will develop friction wear and tear. It is a very damaging form of wear, and that’s why lubrication is recommended.

Clean the Machine

The machine must be maintained clean to keep it in good condition for a long. Some people don’t know that the dirt and dust that attaches to the machine can cause a lot of wear and tears. It could be corrosive, which causes the metal to wear faster. That’s why you need to keep the machine clean

Immediate Repairs & Replacement

If the hydraulic punch press develops faults, which is common, you need to have it repaired and replaced immediately. The faulty parts can increase the rate of wear and tear, and that’s the reason why they should be fixed immediately.

Tighten Loose Screws and Nuts

You can help keep the hydraulic punch press in a good state for long by simply tightening loose nuts and screws. When the parts become loose, they increase the rate of wear and tear. This makes the machine to drop in performance and productivity.